HW Adjustable Slot Cutter
Permanently mounted adjustable slot cutter made of steel for tongue and grooving of corner joints Continue
excl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Description
Steel moulding tool, surface burnished
2-part, adjustment with set of shims (0.1 mm increments)
Tenon milling - only in combination with 04.3.036!
Equipped with 4 high-quality base and periphery HW cutters. For manual feed, limited chip thickness, low kickback.
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Diameter [mm] | 200 |
Moulding Depth [mm] | 65 |
Rip Capacity [mm] | 8,0-15,0 |
Tooth Count [pcs] | 4 |
Downloads
- Technical Drawing (PDF | 171.52 KB)
This might also be of interest to you
Set of shims for slot cutter with 6 auxiliary holes
04.3.036 | ø 30 mm
Felder Set of shims for extended width of slots and tenons
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs