% Offers
Quick order
You are here:
Board Cutter Set | 5 profiles possible with extension cutters
Board Cutter

Board Cutter Set | 5 profiles possible with extension cutters

Ø 160 x 40 x 30 mmArt. No. 04.3.130

Production of tongue and groove boards with open or closed “V-joints”, smooth shuttering boards, floorboards. Continue

£889.00

excl. VAT , without shipping costs

£1,066.80

incl. 20% VAT , without shipping costs

Description

1 tool - 5 possible profiles!

For manual feed, chip thickness limited, low kickback.   Main cutters and spurs made of tungsten carbide.   Steel moulding tool, burnished surface. HW-WP profile cutter.

Production of tongue and groove boards with open or closed "V-joint", smooth shuttering boards, floorboards

Tongue and groove milling set consisting of:

  • Rabbet cutter, WPL-HW, Ø = 143 mm, W = 20.0 mm, ø = 50 mm, Z 2, V 2
  • Groove cutter, WPL-HW, Ø = 160 mm, W = 6.0 mm, ø = 50 mm, Z 4, V 4
  • Rabbet cutter, WPL-HW, Ø = 142 mm, W = 20.0 mm, ø = 50 mm, Z 2, V 2
  • Bevel cutter, WP-HW, a = 30°, Ø = 158 mm, W = 20 mm, ø = 50 mm, Z 2, V 2
  • Shim set holder ø = 50 mm, for spindle ø = 30 mm, Cover ring for set holder

Upgrade for tongue and groove moulding set

  • Supplementary cutter "jointing and bevel cutter for closed joint", order no., 04.3.132
  • Supplementary cutter "jointing and bevel cutter for open joint", order no. , 04.3.133
  • Supplementary cutter "Softline", order no. , 04.3.131
     

Quality of the cutting edges

HW = tungsten carbide (old designation HM)

HS = high-alloy high-speed steel (high-performance steel) 

SP = alloy tool steel (special steel)


Abbreviations

WM = Reversible knife (can be used on both sides)

PM = Profile knife

Technical information

Bore Diameter [mm] 30
Cutter Quality HW
Rip Capacity [mm] 10-40

Downloads

This might also be of interest to you