Filtern nach:

Produktlinie:

Werkstoff:

Filter anwenden
Sliding Table Saws

Sliding Table Panel Saw kappa 400

Scope of application

A masterpiece of ­engineering. The ultimate in precision and smoothness

This precision guiding system will carry maximum loads without compromising the smooth and accurate stroke of the sliding table. The “X”-configuration of the roller bearings optimally distributes workpiece weight to all sides. With a roller bearing system, the full width of the bearing is in contact with the guiding track. With no single point of contact between the bearing and the guiding track as found on conventional ball bearing systems, the roller bearing will never wear a groove into the guiding track. This ensures play-free guiding for the lifetime of the machine. The “X-Roll” system is backed with a 10-year factory guarantee.

FORMAT4. Uncompromising expertise for the highest of requirements

TheFelder Group premium brand has met the highest standards of professional users since 2001. The customised high-performance solutions are uncompromisingly innovative, offer maximum operating comfort and complete productivity.

The most important highlights at a glance

... FORMAT4 Premium machines for premium requirements

  • Constantly high performance in industrial continuous operation
  • Customer specific optimised production solutions
  • Solid design with premium components
  • Many variations of specification packages with high-tech solutions
  • Complete engineering precision
  • Premium user comfort
  • Award winning design
  • Quality and precision from Austria
  • Uncompromised productivity
  • Perfect service package before, during and after the purchase
  • CE + GS dust certified
  • Tailor made financing solutions

Details

Electronic height adjustment with LED display Electronic angle adjustment with digital LED display Tilting of saw-blade 90°-45° Oversized saw arbor with double bearing trunnions Maximum energy transfer from the Poly-V belt ­ 3-speed: 3500/4500/5500 rpm Optimal extraction with a completely enclosed, below table extraction system Dovetail guidance system of the height adjustment A highly robust synthetic material located in the guidance track of the tilting brackets, ensures they run smoothly and are maintenance free even under the most extreme conditions. The tilt guide segment runs without lubrication and is insensitive to dust.

High precision double-sided trunnion support system High load-bearing capacity and operating life Play-free tilt Unaffected by dust Completely maintenance free No lubrication required 6 year guarantee

Tilting of saw-blade 0°-45° 133 mm of cutting depth at 90 degrees 94 mm of cutting height at 45 degrees

Slot cutting is possible with Format-4 panel saws. The use of adjustable dado tools, specifically developed by Format-4, can be used thanks to the removable circular saw flange and the table insert.

A red LED strip immediately signals the operation of the scoring unit and offers even more working safety. (Option)

The clamping system is maintenance free and offers premium comfort for many years: Change saw blades effortlessly in literally no time at all.

An alternative to the worldwide unique Format-4 saw blade quick change system "Easy-Lock" is now the "Quick-Lock" clamping system, which with the use of just one tool makes it quick and easy to change the saw blade.

The rip fence is positioned by a motor and runs via a dust-free integrated ball spindle in the saw table. Fence positioning is accurate to 0.1 mm, this combined with fast positioning speed and that the saw blade height and tilt can be adjusted simultaneously, ensures precision and significant reduction in working time. Automatic measurement correction when the rip fence is laid flat Rip fence park position No collision possible with the saw blade due to the coordination of the tool database by the positioning control The rip fence can be swung away at any point along the full rip capacity

The 8x ball bearings, integrated guide rollers and bearings of the outrigger table ensure an incredibly smooth operation upon maximum loading capacity. The support rail is moved along an “X-Roll” guiding system and is fast and fine-adjustable. The LED display enables you to set the required angle to one tenth of a degree. The fence can be tilted to any position between -45° and +45° and guarantees precise mitre cuts.

As an option, it is also possible to equip the saw with the wireless push button control “ON” switch of the main blade and scoring blade to the sliding table, speeding up the work process further.

“X-Roll”, making a difference:

Extremely smooth and precise sliding action! With the roller-bearing system there is no single point of contact between bearings and guiding track, maximising precision over the lifetime of the machine. A 3 way dust protection system ensures clean, dust free guide rails. This is obtained through silicon wipers, brushes and concave tracks. Your X-Roll sliding table guidance system is backed by a 10 year factory guarantee. Clean, dust-free gui­de rails thanks to special silicon wipers. Hardened-steel tracks ensure accuracy and durability. 10 year guarantee

The solidly built parallelogram outrigger table enables mitre cuts from –45° to +45°. The surface available for the workpiece remains the same regardless of the angle setting. The digital display of the angle setting is accurate to 1/100th of a degree. The angle/length compensation is carried out using either a Nonius scale or “digi-compensation plus”.

No reading errors due to scales and vernier. No time-wasting with arduous approximations of angle values. The advantage of the ­FORMAT-4 degree index is that the stop is set and fixed without losing time or making reading errors.

The outrigger table with workpiece roller is large in its design and the eight ball bearing guide rollers in the support arm ensure an extremely smooth movement, even when under maximum load.

The telescopic fence enables crosscuts of up to 3200 mm. Top class engineering and ease of use are features which are a part of the standard equipment. The scale and the magnifying glass on the stop ensure precise adjustments and settings from the operating area.

On request, we will equip your Format4 with the digital telescopic fence. Below, you see the cleverly integrated electronic digital scale with values correct to 0.1 millimeter. Additional functions, for example the setting of successive measurements, make your daily working life easier.

The rip fence can be fitted with an electronic digital display. The perfect integration of the electronic unit allows you to turn the display around 90°, so the values can be clearly seen and read from the operating area. Additional functions such as the input of incremental measurements make your daily working life easier. Further highlights: Brightly illuminated red LED display facilitates the reading of values No batteries are required as it is directly connected to the machine’s power supply Recognises automatically whether the fence is in the vertical or horizontal position Measurement compensation of the saw blade tooth width

The overhead saw guard is height adjustable and can be swung away. The average depth for especially wide work-pieces is 608 mm.

The tried and tested tool compartment positioned directly at the front of the machine has now been made even more practical with the addition of two magnets for the storage of the riving knife and the scoring blade. There will also be the possibility to attach the edging shoe directly to the machine for storage. So everything is always in its place!

Your Format4 can be optionally ­fitted with a spraying unit. High performance lubricating oil can be sprayed directly onto the saw blade, transported via piping from the spraying unit.

Technology Data

Electrics
001
3x 400 V
S
002
3x 230 V
W
004
50 Hz motor frequency
S
005
60 Hz motor frequency
O
007
7,5 HP (5,5 kW) S6/40%
S
008
10 HP (7,35 kW) S6/40%
O
3 positions at 3500/4500/5500 rpm
S
10
Star-delta start
S
12
Trigger switch for dust extractor start up
O
13
Timer for operating hours
O
Saw unit
Saw unit tilts 90°–45°
S
Electronic angle adjustment with digital read-out
S
Electronic height adjustment with digital read-out
S
Saw blade diameter 250–400 mm, max cutting height 133 mm
S
82
Removable flange for dado tooling incl. a set of flamges
O
71
Storage compartment for 5 saw blades of up to 400 mm
O
73
Spraying unit to assist in processing light metals or plastics
O
79
Scoring unit status light
O
78
"Easy-Lock" - Tool-free quick change system of the main saw blade
O
780
Quick-Lock, the saw blade changing system for main circular saw blade, anti-twist protection by driving pins in flange
O
Scoring Unit
75
Scoring unit “Classic” 1.1 kW, (1.5 HP) scorer adjustable vertically and laterally
O
88
Electrical height adjustment with automatic rise and fall when switching the blade on and off (#75)
O
76
Flange set for scoring blades with a 22 mm arbor instead of 20 mm for the “Classic” and “Automatic” scoring units
W
Cutting width and rip fence
Rip capacity 800 mm with fine adjustment
S
77
Rip capacity 1250 mm
O
85
Rip fence with a digital readout. An automatic length compensation when the sawblade is tilted, 1200 mm rip fence, can be swung away (!84)
O
80
Overhead saw guard, cover for 90° and cover for mitre cuts, height adjustable and can be swung away from working area
S
Sliding tables anodized, “X-Roll” guiding system
132
Sliding table “X-Roll”, cutting length 2050 mm (80¾")
O
133
Sliding table “X-Roll”, cutting length 2500 mm with edging shoe.
S
134
Sliding table “X-Roll”, cutting length 2800 mm (110¼") with edging shoe.
O
135
Sliding table “X-Roll”, cutting length 3200 mm (126") with edging shoe.
O
140
Sliding table “X-Roll”, cutting length 3700 mm (145⅝") with edging shoe.
O
139
Integrated remote switches on sliding table
O
Outrigger table and crosscut fence
160
1500 mm outrigger table with 3200 mm crosscut fence
S
161
1250 x 650 mm (49” x 25”) “X-Roll” outrigger table with adjustable support and digital angle display
O
162
1250 x 650 mm (49” x 25”) parallelogram outrigger table with digital angle display (!133)
O
173
Precision mitre guide for outrigger table, cutting length compensation when tilted
O
166
Extendable extrusion up to 500 mm (19”) on the outrigger table with work piece roller (not available with the parallogram outrigger)
O
164
Crosscut fence 1100 mm (43”) for all “X-Roll” sliding table
O
165
Telescopic extension for crosscut fence 1100 mm to 2000 mm
O
169
3200 mm crosscut fence, moves from 90°–45° with 2 crosscut stops as standard
S
171
1900 mm crosscut fence with precise adjustment, tiltable from 90° to 45°, 1 stop digitally adjustable up to 1900 mm, telescope with analogue stop adjustment for up to 3200 mm for outrigger 1300/1500
O
172
Outrigger digital cross cut stop 3200 mm, 2 digital fence stops, for outrigger table 1300/1500
O
General
Extraction outlet diameter, mm (Unit circular saw guard EURO II is standard for circular saw upper guard)
120/80
Weight, kg (with average equipment)
930
Packaging
223
IPPC packaging
O
Transport
221
Container packaging
O
S ... Standard equipment O ... Option W ... Choice - ... not available
FORMAT-4 kappa 400

Customer service & maintenance

Specially trained service personnel are always available to provide specialised on-site service for you. If the matter is urgent you can call our hotline centre for straightforward immediate help.  Contact our consultants or report your request conveniently online around the clock.

Do you have questions?

We are happy to advise you online, over the phone or on-site at one of our more than 250 sales and service centres worldwide. 

Showrooms

FELDER GROUP UK Ltd.

FELDER GROUP UK Ltd.
Unit 2, Sovereign Business Park Joplin Court, Crown Hill
MK8 0JP MILTON KEYNES
Tel.: 01908 635000

Business hours: Mo. – Fr. 09.00 – 17.00