Filtern nach:

Produktlinie:

Werkstoff:

Filter anwenden
Plastic & Composite Machinery
new

c-tech Bandsaw FB 710 c-tech

Scope of application

Much more than just a bandsaw

The precisely milled, cast iron machine table with 700 x 840 mm can also be extended on three sides offering more support when processing large dimensioned workpieces. In conjunction with the reinforced, low vibration machine chassis, the machine table offers maximum stability. Even when working at the maximum cutting height of 460 mm you can rely on precise results. The easy to adjust tilting table, can be positioned between -5 and +45 degrees and offers numerous applications. The parallel fence can also be positioned on its side and always guarantees a high level of working safety. The 5.5 HP motor achieves a saw blade speed of 800 rpm. With the easy to mount circle cutting and sanding units, the new Felder bandsaw really is a versatile all-rounder and a worthwhile investment for perfection in woodworking. 

  • Designed for high burden load solid machine chassis and cast iron fly wheels and machine table 
  • Standard specification: Durability, precision and cutting smoothness with the X-Life® bandsaw blade ceramic guides 
  • Easy and convenient bandsaw blade quick change 

Variable cutting speed and flexible lubricant application

The new FB 710 c-tech was developed specifically for machining plastics, non-ferrous metals and composite materials, and impresses with its top performance in a wide range of applications Regardless of whether they are being used for the cutting of models and styling block materials such as UREOL®, PURENIT®, SikaBlock®, RAKU-TOOL® or for the trimming of the clamping edge after the thermoforming process. Felder bandsaws offer high performance when processing synthetic materials.

FELDER. Quality and precision in a nutshell

Since 1956, a guarantee for perfect results with excellent ease of use and reliability in regular professional use. Woodworkers are always enthusiastic about the individual and solid solutions for small and mid-sized businesses.

The most important highlights at a glance

Specially designed for plastics, non-ferrous metals and composite materials: The new FELDER FB 710 c-tech - so much more than a simple bandsaw


The new FB 710 c-tech was developed specifically for machining plastics, non-ferrous metals and composite materials, and impresses with its top performance in a wide range of applications Regardless of whether they are being used for the cutting of models and styling block materials such as UREOL®, PURENIT®, SikaBlock®, RAKU-TOOL® or for the trimming of the clamping edge after the thermoforming process. Felder bandsaws offer high performance when processing synthetic materials.

With its 7.5 HP motor power and 460 mm cutting height, the FB 710 c-tech is one of the strongest and largest Felder bandsaws of its class to date. In combination with the innovative X-life ceramic guides included as standard, the bandsaw is unmatched in terms of wear resistance and blade stability.

Variable cutting speed and flexible lubricant application
The continuously adjustable speed control allows individual adaptation to the materials to be cut. Using the push buttons, the cutting speed can be adjusted flexibly in increments of fifty from 400 to 1400 m/min. The lubricant application ensures excellent cuts when processing non-ferrous metals. The lubricant tank can be attached flexibly to the machine by magnet.

Long lasting precision through X-Life ceramic guides
Ceramic guides guarantee excellent cutting results and maximum blade stability with four guiding blocks positioned directly adjacent to the saw blade. The smooth surface results in much less friction resistance. With reduced friction and less heat generation, ceramic guides are practically wear-resistant and enable an extremely long useable life and consistent cutting quality when compared to conventional roller guides.

Details

The lubricant application ensures excellent cuts when processing non-ferrous metals. The lubricant tank can be attached flexibly to the machine by magnet.

The continuously adjustable speed control allows individual adaptation to the materials to be cut. Using the push buttons, the cutting speed can be adjusted flexibly in increments of fifty from 400 to 1400 m/min.

Ceramic guides guarantee excellent cutting results and maximum blade stability due to four guide blocks resting direct against the saw blade. With reduced friction and low development of heat, compared with conventional roller guides, the ceramic guide offers almost unlimited freedom of wear and permits an extremely prolonged service life with consistently high cutting quality.

The mitre fence is continuously adjustable between –45° and +45°. Great for mitre cuts!

The easily positioned aluminum parallel fence can be inserted to the left and right of the saw blade and easily placed on its side for flat workpieces.

The machined and polished cast iron table can be tilted from -5° to +45°.

The bandsaw is equipped as standard with the Felder-coupling system for the use of Felder table extensions. The cast iron table can be extended by up to 1000 mm in three directions.

With this device, you can process edges with different sanding pads (flat, round)

Felder bandsaws are equipped with upper and lower table guides with fine adjustable side and rear rollers.

Table extension can be fitted on 3 sides.

Customer service & maintenance

Specially trained service personnel are always available to provide specialised on-site service for you. If the matter is urgent you can call our hotline centre for straightforward immediate help.  Contact our consultants or report your request conveniently online around the clock.

Do you have any questions?

We are happy to advise you online, over the phone or on-site at one of our more than 270 sales and service centres worldwide. 

Showrooms

FELDER GROUP UK Ltd.

FELDER GROUP UK Ltd.
Unit 2 Sovereign Business Park Joplin Court, Crown Hill
MK8 0JP MILTON KEYNES
Tel.: 01908 635000

Business Hours Monday to Friday 09.00 to 17.00