new

Edgebander G 360

edgebanders g 360 felder panel
Select model
edgebanders g 380 felder panel
G 380
Available immediately Now customisable
Book now Secure at promotional price
edgebanders g 360 felder panel
G 360
Available immediately Now customisable
Book now Secure at promotional price
edgebanders g 330 felder panel
G 330
Available immediately Now customisable
Book now Secure at promotional price
edgebanders g 360 felder panel

The new edition of the Felder G 300 edgebanders in a new and modern look is now even more efficient with the changeable gluepot

With the new changeable gluepot, the flexibility and productivity of larger edgebanders can also be achieved with the Felder Series G 300 models. The quick and easy change to other adhesive colours and the use of PUR glue guarantee productive procedures and excellent edges for all areas of application.

The G 330 is the smallest edge bander with chain conveyor and with a length of 2 meters it fits in every workshop. The perfect coordination of the individual components eliminates the need for manual postprocessing.

The G 360 impresses with even more power and the proven side trimming unit: Two independent high-frequency motors with a speed of 12,000 rpm and equipped with diamond cutters enable an unprecedented edge processing quality. A whole new standard of splinter-free, industrial quality glue joints with the G 360.

The new Felder G380 edgebander, with its extended end trimming unit and radius trimming, offers the highest level of flexibility in the edgebander compact class. The individual configuration with two finishing unit spaces and extensive all-round equipment in a compact design meet the highest quality standards, while taking up minimal space.

  • Quick-Set system for quick adaptation to different material thicknesses
  • Compact design and smallest footprint
  • Unique price-performance ratio
  • Teflon-coated interchangeable glue basin for 1.2 kg adhesive granulate
  • Glue and colour change in a few seconds

FELDER. Quality and precision in a nutshell

Since 1956, a guarantee for perfect results with excellent ease of use and reliability in regular professional use. Woodworkers are always enthusiastic about the individual and solid solutions for small and mid-sized businesses.

The most important highlights at a glance

64629_Wechselleimbecken.png
1518-obererdruckbalken.png
1529-bedienpult.png

Variants

Models
Variants
  • Your benefits

G 380

Variants
edgebanders g 380 felder panel
  • Installation length: 2828 mm
  • Edge thickness: 0.4–5 mm
  • Workpiece thickness: 10–45 mm
  • Automation: Quick-set system
  • End trimming unit with linear trimming
  • Premilling unit
  • Teflon-coated changeable gluepot
0

G 360

Variants
edgebanders g 360 felder panel
  • Installation length: 2828 mm
  • Edge thickness: 0.4–5 mm
  • Workpiece thickness: 10–45 mm
  • Automation: Quick-set system
  • End trimming unit with linear trimming
  • Premilling unit
  • Teflon-coated changeable gluepot
1

G 330

Variants
edgebanders g 330 felder panel
  • Installation length: 2444 mm
  • Edge thickness: 0.4–5 mm
  • Workpiece thickness: 10–45 mm
  • Automation: Quick-set system
  • Teflon-coated changeable gluepot
2

... Your decision for Felder, a risk-free decision

Edgebander G 360 Felder Felder Group Woodworking
  • The right machine for every budget
  • Complete reliability in professional use
  • Tailor made machine solutions
  • High quality cast iron machine table and aggregates
  • Innovative detail solutions derived from 60 years of experience  already included in the standard configuration
  • First class manufacturing and finishing standards
  • Intuitive application concepts
  • Modern, distinct design
  • Quality and precision from Austria
  • Powerful and efficient
  • Complete package: Comprehensive service support

Details

The Teflon-coated changeable gluepot can be quickly and easily replaced and holds 1.2 kg of adhesive granulate. After a heating time of approx. 12 minutes, the machine is ready for use. The micro adjustable glue roller ensures the correct dosage of the hot-melt adhesive and allows perfect matching to different edge materials.

The quick and easy change to other adhesive colours and the use of PUR glue guarantee productive procedures and excellent edges for all areas of application.

64629_Wechselleimbecken.png
The biggest advantage of the new multi-functional combination unit is the amount of space it saves in the machine. Adjustment of the settings from flush to bevelled finish for thin edges and also radius trimming is quick and easy. 2 mm radius tooling is included as standard.
8733-multifunktionsaggregat.png
Fine tunes the edge radius and removes excess glue.
1388-radienzieh&shyklingenaggregat.png
This unit removes any remaining glue residue from the panel, leaving a perfect finish requiring no extra finishing.
1517-flaechenziehklinge.png
Super finish for ABS- and PVC material. Optional installation of polishing solution spray applicator for the polishing heads.
8714-poliereinheit.png

G 380

The individual machine units are switched on and off from the control panel.
  • Glue temperature settings
  • Automatic glue temperature decrease
  • Units can be selected and disengaged
  • Odometer for total metres of material used
  • Display of the maintenance intervals
  • Plain text error messages
  • Coiled materials of 0.4-3mm in thickness and solid wood edge strips of 5mm thickness can be processed in single feed with 14 to 50mm edge height. The processing of strip materials is possible in single feed. The synchronised, mechanical edge feed ensures an optimal feed of the material.
     

    59799_Kantenzufuehrung.png
    The patented height adjustment of the upper pressure bar is carried out using a handle. The value at which it needs to be set can be read using the scale The feed height can be adjusted from 10–45 mm by means of a newly developed quick change adjustment.
    8782-obererdruckbalken.png
    The two diamond-tipped milling heads rotate in opposing directions, ensuring a perfectly straight workpiece edge to which the edge material can be glued. The premilling unit guarantees that chipped or torn edges are a thing of the past, each and every time.
    8783-fuegeaggregat.png
    To trim coiled material up to 3 mm thick.
    8799-schlagschere.png

    The pressure roller unit consists of one large roller followed by a smaller one. The purpose of the unit is to improve the glue bond between the edge and the material. The unit is mechanically spring loaded and due to the “Quick” setup system, can be adjusted exactly to the required edge thickness. Due to the adjustable spring system, a perfect bond between the panel and edge is guaranteed .

    8785-anpresseinheit.png

    End trimming unit with high precision linear guide ensures perfect cuts. The saw blades rotate at 12.000 rpm with a 0.22 kW motor and stand guarantor for perfect cutting results of superior quality and quality for any challenge. With coiled material up to 2mm, a radius trimming can be made and thus allowing for individual application.
    The selection for flush or radius trimming is done conveniently via the control panel.
     

    59789_Kappsaegegeraet.png

    G 360

    The individual machine units are switched on and off from the control panel.
  • Glue temperature settings
  • Automatic glue temperature decrease
  • Units can be selected and disengaged
  • Odometer for total metres of material used
  • Display of the maintenance intervals
  • Plain text error messages
  • The patented height adjustment of the upper pressure bar is carried out using a handle. The value at which it needs to be set can be read using the scale The feed height can be adjusted from 10–45 mm by means of a newly developed quick change adjustment.
    8782-obererdruckbalken.png
    The two diamond-tipped milling heads rotate in opposing directions, ensuring a perfectly straight workpiece edge to which the edge material can be glued. The premilling unit guarantees that chipped or torn edges are a thing of the past, each and every time.
    8783-fuegeaggregat.png

    The pressure roller unit consists of one large roller followed by a smaller one. The purpose of the unit is to improve the glue bond between the edge and the material. The unit is mechanically spring loaded and due to the “Quick” setup system, can be adjusted exactly to the required edge thickness. Due to the adjustable spring system, a perfect bond between the panel and edge is guaranteed .

    8785-anpresseinheit.png
    High precision linear guides for perfect cutting results. The saw blades rotate at 9,000 rpm, guaranteeing perfect cutting results regardless of the type and thickness of the wood.
    8732-kappsaegeaggregat.png

    G 330

    The  Felder G 330 is a real space-saver that offers professional edgebanding on the smallest of footprints.

    8764-raumwunder.png
    The individual machine units are switched on and off from the control panel.
  • Glue temperature settings
  • Automatic glue temperature decrease
  • Units can be selected and disengaged
  • Odometer for total metres of material used
  • Display of the maintenance intervals
  • Plain text error messages
  • 1529-bedienpult.png
    The patented height adjustment of the upper pressure bar is carried out using a handle. The value at which it needs to be set can be read using the scale The feed height can be adjusted from 10–45 mm by means of a newly developed quick change adjustment.
    1518-obererdruckbalken.png
    The pressure roller unit consists of one large roller followed by a smaller one. The purpose of the unit is to improve the glue bond between the edge and the material. The unit is mechanically spring loaded and due to the “Quick” setup system, can be adjusted exactly to the required edge thickness. Due to the adjustable spring system, a perfect bond between the panel and edge is guarranteed.
    8731-anpresseinheit.png
    High precision linear guides for perfect cutting results. The saw blades rotate at 9,000 rpm, guaranteeing perfect cutting results regardless of the type and thickness of the wood.
    8732-kappsaegeaggregat.png
    Precise work-piece feeding with chain and drive rollers in an offset formation, leaving no scratches on the workpiece surface.
    8738-werstueckkettenfoerderer.png
    video-cC4J207nB4U.jpg
    Felder® G380 Edgebander
    video-aRUM3nG3LZg.jpg
    FELDER® G330 Compact Edgebander
    video-cC4J207nB4U.jpg
    video-aRUM3nG3LZg.jpg

    Customer service & maintenance

    Specially trained service personnel are always available to provide specialised on-site service for you. If the matter is urgent you can call our hotline centre for straightforward immediate help.  Contact our consultants or report your request conveniently online around the clock.
    feldergroup-contact-us.png

    Do you have any questions?

    We are happy to advise you online, over the phone or on-site at one of our more than 270 sales and service centres worldwide. 

    Showrooms

    FELDER GROUP Australia in NSW/ACT

    FELDER GROUP Australia in NSW/ACT
    Unit 1, 125 Russell Street
    NSW 2750 Emu Plains
    Tel.: (02) 4735 1011
    Fax: (02) 4735 8222

    Show room open times: Monday – Friday 08:30 – 17:30

    FELDER GROUP Australia in Victoria

    FELDER GROUP Australia in Victoria
    Please note: New Felder Group Victoria details
    3/353 Dorset Road.
    VIC 3153 Bayswater
    Tel.: Victoria East: +61 (0) 478 832 228 // Victoria West: +61 (0) 411 277 390

    FELDER GROUP Australia in Western Australia

    FELDER GROUP Australia in Western Australia
    49 Competition Way
    Wangara, 6065 Western Australia
    Tel.: (08) 9209 3055
    Fax: (08) 9209 3099

    Show room open times: Monday – Friday 08:30 – 17:00

    FELDER GROUP Australia in QLD/NT

    FELDER GROUP Australia in QLD/NT
    4/ 14 Buttonwood Place
    QLD 4110 Willawong
    Tel.: 0418 435 204

    Show room open times: Monday – Friday: By appointment.
    Show more