002
3x 230 V motor voltage
Standard equipment
003
1x 230 V, motor power 4.0 HP (3.0 kW)*
Option
005
60 Hz
Standard equipment
007
5.5 HP (4.0 kW)*
Standard equipment
008
7.5 HP (5.5 kW)*
Option
009
10.0 HP (7.35 kW)*
Option
10
Star-delta start is necessary from 7.5 HP and 3x230V
Option
12
Trigger switch for dust extractor start
Option
25
Electrical display setting „Inch“
Optional equipment at no extra cost
26
Electrical change of the power supply to 3x 208 V
Optional equipment at no extra cost
29
Electrical equipment according to CSA rules
Option
69
Sliding table saw with tilting saw blade (90°–45°), maximum cutting height 104 mm with a 315 mm saw blade, 4800 rpm
Standard equipment
200
Electronic height adjustment on saw blade, without LED display (#71)
Option
201
Electrical height and angle adjustment of the saw unit with LED display („Power-Drive“ K2)
Option
71
Digital indicator on handwheel for saw tilt
Option
73
Spraying unit for processing of light metals and plastics (#16)
Option
82
Preparation for Dado tooling up to 19.5 mm in width
Option
84
Micro adjustable rip fence
Option
85
Digital display for rip fence with fine adjustment (!77)
Option
86
Digital display for rip fence with fine adjustment (#77)
Option
75
Electrically driven scoring unit Ø 120 mm with main saw blade Ø 315/350 mm
Option
23
Electrically driven scoring unit with 1 x 230 V; Ø-120 mm with main saw blade-Ø 315/350 mm (#003)
Option
76
800 mm rip capacity with full table length, min. transport width 1000 mm
Standard equipment
175
Inch scale for rip capacity 31"
Option
77
Cutting width 49” (1250 mm) with full table length, min. transport width 39” (1000 mm)
Option
176
Inch scale for rip capacity 49"
Option
91
Extractor hose mounting for rip capacity 800/1250 mm
Option
80
Saw guard EURO II
Standard equipment
81
Overhead saw guard for 800/1250 mm cutting width, swings away from the working area
Option
81A
Overhead saw guard for 1250 mm cutting width, swings away from the working area
Option
89
Automatic rip fence for 49¼" (1250 mm) cutting width, control panel positioned under the sliding table guiding track. (#134/135/140)
Option
891
Automatic rip fence for 800 mm(31½") cutting width, control panel positioned under the sliding table guiding track (#134/135/140)
Option
133
Dimension sliding table F, cutting length 2500 mm(98"), anodised** with edging shoe
Standard equipment
134
Dimension sliding table X, cutting length 2800 mm(110"), anodised** with edging shoe
Option
135
Dimension sliding table XL, cutting length 3200 mm(126"), anodised** with edging shoe
Option
140
Dimension sliding table XXL, cutting length 3700 mm(145"), anodised** with edging shoe
Option
136
Dimension sliding table anodised
Standard equipment
139
On and off switch on the sliding table
Option
160
1300 mm Outrigger table for 1300–2500 mm sliding talbes
Standard equipment
161
1500 mm Outrigger table for 2500–3700 mm sliding tables
Optional equipment at no extra cost
164
Crosscut fence 1100 mm(43") for all sliding tables
Option
165
Telescopic extension for crosscut fence 1100 mm(43") to 2000 mm(78") (#164)
Option
166
Crosscut fence 2600 mm for outrigger table (#159/160)
Standard equipment
169
Crosscut fence 3200 mm for outrigger table, X-Roll system with 2 crosscut stops instead of crosscut fence 2600 mm (#166/168+159/160)
Option
170
Precision mitre unit with pin locating system for outrigger table crosscut fence
Option
173
Precision mitre guide with cutting length compensation for 1300/1500 outrigger
Option
171
Digital cross cut stop 1900 mm(74"), 1 digital fence stop, extendable to 3200 mm(126") for outrigger 1500
Option
172
Outrigger digital cross cut stop 3200 mm(126"), 2 digital fence stops, for outrigger table 1500
Option
Working height in inch
35
Min. transport width in inch (without option 012)
39⅜
Extractor connection port diameter in mm on overhead saw guard
120/50 (80)
Weight, lbs (with average equipment)
1628
221
Preparation for container
Standard equipment